168
06-1491-00-12.fm
Attachments and Options
Changing mowing blades
1. Place the vehicle on a level surface and hold it with the parking brake.
Raise the mower with the joystick
. Switch the engine off
and pull out the ignition key.
and take off the disk and mowing blade.
3. Fit new mowing blade with disk and screw.
Changing the V-belt
1. Place the vehicle on a level surface and hold it with the parking brake.
Raise the mower with the joystick
. Switch the engine off
and pull out the ignition key.
2. Loosen the screws on the covers
and remove the covers.
3. Relax the tension spring with the screw
and unhook it.
4. Remove the screws of the gearbox holder
Fig. 164-D
and remove the
defective V-belt.
5. Insert the new V-belt corresponding to
Fig. 164-X
.
6. Fasten the screws on the gearbox holder.
7. Adjust the clamping screw again corresponding to the clamping length
of the label (165 mm).
8. Refit the covers correctly.
Lubrication points
Check the lubrication points weekly.
Grease: Mobilgrease MP
•
Bushes of the wheel holders
Fig. 164-E
(4 pcs.)
Note
Tightening torque of the mowing blades: 120 Nm
Summary of Contents for Citymaster 1600
