38
02-1491-00-11.fm
Operation
Example: Setting the output of hydraulic circuit I
The following example shows how the output of hydraulic circuit I can be
changed in the working menu.
1 The normal view
(A)
is displayed.
2 Turn the turn-push knob
Fig. 14-69
: The last active function
(B)
is
selected. (For example: hydraulic circuit I with maximum 50 litres/
minute to 30 %)
3 Turn the turn-push knob: The current value is changed. (For example,
hydraulic circuit I with 80 %).
The change is made immediately in working travel. If the change is made
in the transport driving mode, it is activated only on changing to the work-
ing driving mode.
Danger
Risk of injury! Make sure that the attachments are suitable for
the set oil volume. An oil volume set too high can lead to inju-
ries due to a defect of the attachment! As a reminder, the set-
ting process is interrupted briefly at 70 %.
69
Fig. 14:
A
B
C
Summary of Contents for Citymaster 1600
