64
02-1491-00-11.fm
Operation
Adjusting the lowering valve
The lowering valve
is used to adjust the lowering speed of the
front tool carrier.
•
Turn the lowering valve clockwise = lowering speed lower
•
Turn the lowering valve counter-clockwise = lowering speed higher
Adjustable upper link (optional)
The adjustable upper link
Fig. 55-A
is provided for the fine adjustment of
attachments and for simplified take-up of attachments with conventional
A-frames type 0. Loosen the nut
and adjust the middle section
with a suitable tool to the required length. Then secure with the nut
Fig. 55-B
.
•
Turn the middle section clockwise = the front tool carrier inclines to the
front
•
Turn the middle section counter-clockwise = the front tool carrier
inclines to the back
Maximum
(I)
: The spindle touches the edges of the long elongated hole.
Minimum
(II)
: both spindles are flush
Standard length
(III)
: The spindle touches the edges of the short elon-
gated hole.
Lift system tipper body (optional)
With the optional lift system tipper body, additional controls for raising or
lowering the tipper body are located on the left side of the rear wagon.
•
Raise tipper body: Press the button
and the button
Fig. 56-B
simultaneously
•
Lower tipper body: Press the button
Fig. 56-A
and the button
Fig. 56-C
simultaneously
Fig. 54:
Fig. 55:
A
B
II
I
III
Note
When the sweeping system is used, adjustment to position III
is required for correct operation of the sweeping unit.
A
Fig. 56:
B
C
Danger
Risk of crushing! When carrying out work on the tipper body,
always operate the controls in two-handed operation.
Summary of Contents for Citymaster 1600
