4-10
X56b510.fm
Maintenance
4.4.2
Specification of the engine coolant
The coolant additive prevents damage by frost and corrosion, prevents
lime deposits and also raises the boiling point of the water. For these rea-
sons, the cooling system must be filled with coolant additive the whole
year round.
Particularly in countries with a tropical climate, the coolant additive con-
tributes to operational safety by increasing the boiling point when the
engine is exposed to higher loads.
The cooling system must be filled with a mixture of water and coolant
additive
G 12
(observe information on the label) or an additive with the
specification TL-VW 774 D
.
The cooling system contains approx. 12 l coolant. The permanent filling of
the cooling system consists of 50% – but never more than 55% – coolant
agent
G 12
and provides frost protection up to -35 °C.
The water must have the following properties:
•
Total hardness
3 - 8 ° dH (German hardness)
•
ph value
7 - 8
•
Chlorine content
< 75 mg/l
Ask your local water authority for tap water specifications.
Unsuitable coolants include saltwater, rainwater, distilled water, water with
a high chloride content and fully demineralized water from ion exchang-
ers.
Summary of Contents for Citymaster 2000 1480
