2-6
X56b210.fm
Safety Information
•
When deployed on slopes, drive/work directly uphill or downhill where
possible. There is a risk of tipping when driving across slopes!
Always keep attachment devices/working equipment close to the
ground in such cases! This also applies when driving downhill!
Adapt your driving speed to the local conditions when driving on slopes!
Never change to a lower gear when driving on a slope, always before
reaching it!
•
When the vehicle is fully loaded and driving down a steep slope, the
driver must actuate the brakes in order to maintain the top speed
permitted. A message appears in the multifunctional display prompting
the drive to brake.
•
Before leaving the driver's seat, always secure the vehicle against
inadvertent movement and unauthorized use!
Lower the working equipment/attachment devices on the ground.
•
Before starting work, check that all safety devices are properly installed
and functional and that all warning triangles, approved warning light
and first-aid kit are available.
•
Before driving the vehicle or starting work:
•
Make sure visibility is sufficient (do not forget the rear-view mirrors)!
•
Adjust the seat to its correct position (it must be possible to depress
brake pedal fully)! Never adjust the driver's seat when driving or
working!
•
Fasten your safety belt.
•
Check the immediate surroundings (children)!
The driver is responsible to third-parties in the work area!
•
Take the utmost care when handling fuel - increased risk of fire!
Make sure fuel does not come into contact with hot parts!
Never fill fuel in the vicinity of naked flames or sparks! Switch off the
vehicle before filling fuel and do not smoke!
•
When traveling through underpasses, tunnels, on bridges, passing
overhead cables etc., always ensure sufficient clearance!
•
Always ensure sufficient clearance to the edges of construction pits and
embankments!
•
Activate the vehicle's all-wheel drive on slippery roads and pathways.
•
The utmost caution must be taken when driving on slippery roads and
pathways. When the vehicle is empty and has a low rear axle load,
actuate the accelerator pedal slowly and apply the brake pedal
carefully!
Summary of Contents for Citymaster 2000 1480
