03-1481-00-00.fm
135
Operation
3.4.4
Mounting the sweeping unit (3-brush system)
Observe the Safety instructions – Vacuum sweeping system,
see page 130.
1. Place the vehicle on a level surface and hold it with the parking brake.
2. Use the upper link
to adjust the raised front tool
carrier
vertically.
3. Lower the front tool carrier with the tip switch
4. Remove the M16 fastening bolt and the washer
of the front
tool carrier.
5. Use the trolley
(option) to align the sweeping unit
centrally and in alignment with the front tool carrier.
6. Raise the front tool carrier with the tip switch
and attach
the sweeping unit.
7. Hold the front tool carrier in the raised position with the throttle
valve
. If necessary, adjust the lowering speed of the
suction mouth with the throttle valve
.
8. Secure the sweeping unit using a washer and M16 fastening bolt.
Remove the trolley from the sweeping unit.
With the option 'sweeping unit with weed brush'
, carry out
installation accordingly.
Fig. 103:
D
E
C
B
A
Summary of Contents for Citymaster 2200
Page 35: ...02 1481 00 00 fm 35 Operation Fig 3 34 31 29 32 33 34 35 36 37 30...
Page 39: ...02 1481 00 00 fm 39 Operation Fig 5 73 74 71 72 72 71 74 75 76 82 83 84 77 78 79 81...
Page 43: ...02 1481 00 00 fm 43 Operation Fig 7 114 116 117 118 119 120 115 113 112...
Page 236: ...236 05 1481 00 00 fm Maintenance and servicing...
