218
05-1481-00-00.fm
Maintenance and servicing
5.17.3 Lamps
Observe the Safety instructions – Electrical system, see page 212.
We recommend always carrying spare light bulbs in the vehicle, as these
are important for maintaining traffic safety.
Front headlights
In order to change the light bulbs of the front headlights, open the front
cover:
1. Use a special wrench from the toolbox to turn the lock
Fig. 170-A
on
the left and right on the front cover by 90° to the vertical position.
2. Fold the front cover forwards.
3. Remove the hexagon nuts
.
4. Tilt the headlight plate
Fig. 170-C
to the rear.
High beam headlights
Changing the light bulb in the front high beam headlight:
1. Remove the cable plug
Fig. 171-A
.
2. Remove the sealing cap
.
3. Squeeze the tension spring
Fig. 171-C
together with your fingers and
remove the light bulb
.
4. Hold the new light bulb
at the lamp socket, do not touch the
glass bulb, and insert it in the headlight.
5. Pay attention to the locking device that ensures correct positioning of
the light bulb
in the headlight (see figure).
6. Install the tension spring
, the sealing cap
Fig. 171-B
and
the cable plug
in reverse order.
A
C
Fig. 170:
B
MC262-096
C
D
Fig. 171:
B
A
Summary of Contents for Citymaster 2200
Page 35: ...02 1481 00 00 fm 35 Operation Fig 3 34 31 29 32 33 34 35 36 37 30...
Page 39: ...02 1481 00 00 fm 39 Operation Fig 5 73 74 71 72 72 71 74 75 76 82 83 84 77 78 79 81...
Page 43: ...02 1481 00 00 fm 43 Operation Fig 7 114 116 117 118 119 120 115 113 112...
Page 236: ...236 05 1481 00 00 fm Maintenance and servicing...
