204
05-1481-00-00.fm
Maintenance and servicing
5.13.1 Checking the brake fluid
Observe the Safety instructions – Brake system, see page 203.
The brake fluid tank
is located on the left-hand side under-
neath the vehicle cab. The filling level can be checked from the outside.
An opening for topping up is located underneath the foot mat.
Check the brake fluid level at the brake fluid tank at regular intervals and
top up as required. Maintenance intervals according to maintenance plan,
see page 167. The warning symbol
Fig. 161-B
in the indicating device
also lights up if the brake fluid level is too low.
1. Place the vehicle on a level surface and secure it with the parking
brake.
2. Switch the engine off and pull out the ignition key. Allow the engine to
cool down.
3. If the brake fluid level in the brake fluid tank is not between the MIN and
MAX markings, top up brake fluid.
5.13.2 Topping up the brake fluid
Observe the Safety instructions – Brake system, see page 203.
1. Put the foot mat
aside and remove the blind cover
.
2. Clean the filler cap
and the area around the filler opening.
3. Remove the filler cap.
4. Top up original brake fluid up to the MAX marking.
5. Firmly screw the filler cap back on.
6. Make sure there is no leakage.
Fig. 161:
A
MAX
MIN
B
Fig. 162:
C
B
A
Attention
Contamination of the brake fluid can cause the brake system
to fail! When working on the brake system, ensure that
everything is extremely clean!
Summary of Contents for Citymaster 2200
Page 35: ...02 1481 00 00 fm 35 Operation Fig 3 34 31 29 32 33 34 35 36 37 30...
Page 39: ...02 1481 00 00 fm 39 Operation Fig 5 73 74 71 72 72 71 74 75 76 82 83 84 77 78 79 81...
Page 43: ...02 1481 00 00 fm 43 Operation Fig 7 114 116 117 118 119 120 115 113 112...
Page 236: ...236 05 1481 00 00 fm Maintenance and servicing...
