05-1481-00-00.fm
231
Maintenance and servicing
Engine compartment
5.19.2 Special tightening torques
5.19.3 Screw connections
Screw connections on supporting parts subjected to heavy loads (e.g.
axles, engine, chassis, trailer coupling etc.) should be checked at regular
intervals, especially if they have been loosened for maintenance and
repair work.
Tighten any loose screw connections immediately.
Danger
Clean the engine at engine standstill only – otherwise there is
a risk of injury! Switch the engine off before cleaning.
Attention
When cleaning the engine with a water or steam jet cleaner,
do not expose electrical plug connections and sensors, such
as oil pressure switch, to a direct jet.
Otherwise penetrating moisture can lead to corrosion and to
failure of the measuring function!
Designation
Tightening torque
Wheel bolts
380 Nm
Oil drain screw, engine oil sump
30 Nm
Engine oil filter (oiled seal)
25 Nm
Pressure filter, drive
45 Nm
Summary of Contents for Citymaster 2200
Page 35: ...02 1481 00 00 fm 35 Operation Fig 3 34 31 29 32 33 34 35 36 37 30...
Page 39: ...02 1481 00 00 fm 39 Operation Fig 5 73 74 71 72 72 71 74 75 76 82 83 84 77 78 79 81...
Page 43: ...02 1481 00 00 fm 43 Operation Fig 7 114 116 117 118 119 120 115 113 112...
Page 236: ...236 05 1481 00 00 fm Maintenance and servicing...