3
Notes on warranty
The terms of the sales contract apply.
Damages are not subject to warranty if
they are due to non-compliance with the
maintenance and service provisions.
The maintenance work has to be
performed by an authorized Hako
service center and confirmed in the
"Maintenance certificate" which is the
warranty document.
The following is excluded from
warranty: fuses, natural wear, damages
caused by overload, inexpert handling
and unauthorized modification of the
machine. Moreover, any claim for
warranty cannot be accepted if
damages of the machine are caused by
fitting parts or accessories without
Hako’s prior and explicit consent or by
non-compliance with the maintenance
instructions.
Acceptance of the machine
Upon arrival, check machine for
possible damages in transit. For refund
of such damage, have the Deutsche
Bahn AG or your freight forwarder
confirm such damage. Mail notification
and waybill to:
Hako-Werke GmbH
Hamburger Strasse 209-239
23843 Bad Oldesloe
Regulations for Approval
According to §18 of the German
MotorVehicle Construction and Use
Regulations (StVZO), the Hako-
Citymaster 90 is an automotive
machine. The manufacturer supplies
the expertise required for type approval.
On the base of this expertise, the local
approval authority submits the valid
type approval.
Due to the maximum designed speed of
less than 20 km/h a license plate is not
required.
According to the German Motor Vehicle
Construction and Use Regulations
(StVZO), the machine has to be
equipped with first aid kit, warning
triangle and the type approval
certificate when being used on public
roads, paths and places. The Hako-
Citymaster 90 is subject to the regular
main inspection according to § 29 of the
German Motor Vehicle Construction
and Use Regulations (every 24
months).
Any modification carried out at the
Hako-Citymaster 90 and having an
influence on the type approval
specifications and are not indicated
there will render the type approval
invalid. Before receiving a new type
approval, the machine has to be
presented to an authorized expert for
issue of new expertise. This expertise
turns type approval after being stamped
by approval authority.
Driving Licence
According to the Driving Licence Act,
any person who is driving a vehicle
running at a construction-defined
maximum speed of 6 km/h or more on,
public roads, paths and places has to
hold a valid driving licence. A driving
licence of the class L is required for
driving the Hako-Citymaster 90
(automotive machine up to a speed of
25 km/h).
Introduction
3
Notes on warranty
The terms of the sales contract apply.
Damages are not subject to warranty if
they are due to non-compliance with the
maintenance and service provisions.
The maintenance work has to be
performed by an authorized Hako
service center and confirmed in the
"Maintenance certificate" which is the
warranty document.
The following is excluded from
warranty: fuses, natural wear, damages
caused by overload, inexpert handling
and unauthorized modification of the
machine. Moreover, any claim for
warranty cannot be accepted if
damages of the machine are caused by
fitting parts or accessories without
Hako’s prior and explicit consent or by
non-compliance with the maintenance
instructions.
Acceptance of the machine
Upon arrival, check machine for
possible damages in transit. For refund
of such damage, have the Deutsche
Bahn AG or your freight forwarder
confirm such damage. Mail notification
and waybill to:
Hako-Werke GmbH
Hamburger Strasse 209-239
23843 Bad Oldesloe
Regulations for Approval
According to §18 of the German
MotorVehicle Construction and Use
Regulations (StVZO), the Hako-
Citymaster 90 is an automotive
machine. The manufacturer supplies
the expertise required for type approval.
On the base of this expertise, the local
approval authority submits the valid
type approval.
Due to the maximum designed speed of
less than 20 km/h a license plate is not
required.
According to the German Motor Vehicle
Construction and Use Regulations
(StVZO), the machine has to be
equipped with first aid kit, warning
triangle and the type approval
certificate when being used on public
roads, paths and places. The Hako-
Citymaster 90 is subject to the regular
main inspection according to § 29 of the
German Motor Vehicle Construction
and Use Regulations (every 24
months).
Any modification carried out at the
Hako-Citymaster 90 and having an
influence on the type approval
specifications and are not indicated
there will render the type approval
invalid. Before receiving a new type
approval, the machine has to be
presented to an authorized expert for
issue of new expertise. This expertise
turns type approval after being stamped
by approval authority.
Driving Licence
According to the Driving Licence Act,
any person who is driving a vehicle
running at a construction-defined
maximum speed of 6 km/h or more on,
public roads, paths and places has to
hold a valid driving licence. A driving
licence of the class L is required for
driving the Hako-Citymaster 90
(automotive machine up to a speed of
25 km/h).
Introduction
