2.2 Dry Suction
• Loosen the locking device on the tank
and remove the vacuum head from
the top.
• Make sure that the machine is provided
with cartridge fi lter.
• Clean and dry the tank, hose and
accessories as necessary.
• Put the vacuum head back onto the
tank and lock the locking device.
• Plug the vacuum hose and the handle
with the required accessories to the
hose connector on the tank until the
hose end snaps in.
• Connect the power cord to a circuit
breaker with Type L or with a 16A- safe
protected socket.
• The machine is now operational.
• For dry vacuuming, turn the units
power switch on.
Operation
• Just pull to remove the cartridge,
then push right to the end to install it
again.
1
2
Summary of Contents for Cleanserv VD5
Page 1: ...Instruction manual Cleanserv VD5 7140...
Page 19: ...19 Notice...
