6
Safety Information
1.2
General information
• In addition to the information provid-
ed in this operating manual, all the
legally applicable health and safety
provisions must be observed.
• Before starting up the machine for
the first time, read the operating
manual supplied with it thoroughly as
well as any separate manuals pro-
vided with additional or attachment
devices and observe all the informa-
tion during work.
• The Cleanserv VL1-15 / VL1-30 may
only be operated, serviced and re-
paired by persons who have re-
ceived the necessary training from
Hako personnel or personnel author-
ized by Hako.
• The appliance is not to be used by
children or persons with reduced
physical, sensory or mental capabili-
ties, or lack of experience and knowl-
edge, unless they have been given
supervision or instruction.
• Particular attention should be paid to
the information regarding safety.
Technical expertise is the key to pre-
venting errors when operating the
equipment and ensuring trouble-free
operation.
• The operating manual must always
be kept at the operating location of
the machine and, as a result, should
kept in a safe place on the machine.
• If the equipment is sold or rented out,
these documents should be trans-
ferred to the new owner/operator.
The transfer should be confirmed!
• For reasons of safety, always use
original spare parts.
• Keep children away from the ma-
chine.
1.3
Operating information
• ATTENTION – this machine is only
intended for use indoors.
• This appliance is suitable for com-
mercial use, for example in hotels,
schools, hospitals, factories, shops,
offices and rental businesses.
• Check the machine in respect of its
perfect condition and operational
safety each time before starting it up.
Faults and defects, particularly in re-
spect of the electrical system, must
be cleared up immediately!
• Never complete any modifications to
the machine. Any form of manipula-
tion can have fatal consequences
and, in all cases, annuls all rights to
claims under the terms of warranty.
• Before starting work, the operator
must be fully familiar with all adjust-
ment, operating and control ele-
ments and accessories as well as
their respective function! It is too late
to do this when the machine is actu-
ally in operation! Only start work af-
ter you have followed the
instructions in this manual and can
operate the machine safely.
• Any use of the machine which devi-
ates from that described in this oper-
