30
Maintenance and Service
5
Maintenance and Ser-
vice
General information
It is essential to pay attention
to the information in Chapter
"Safety Information" before
completing any service or
maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure
that the vehicle is always ready to be
put into operation.Maintenance and re-
pair work necessary on a daily and
weekly basis can be carried out by a
driver trained to complete the work, all
other Hako system maintenance may
only be completed by personnel who
are correspondingly qualified and
trained. Please contact your nearest
Hako service center or Hako authorized
dealer. Failure to observe this annuls
any rights to claims under the terms of
guarantee in respect of resulting dam-
age or consequential damage.
Always specify the serial num-
ber in the case of inquiries and
spare parts orders, refer to
section 1.7 - Rating plate.
5.1
Hako system maintenance
The Hako system maintenance:
• ensures that the Hako vehicle is al-
ways ready for operation (preventive
maintenance),
• minimizes operating costs, mainte-
nance and repair costs,
• ensures the vehicle has a long ser-
vice life.
Hako system maintenance provides in-
dividual modules explaining the special
technical work to be carried out and
prescribes the intervals at which the
work should be performed. Parts to be
replaced for the individual maintenance
tasks are defined and provided in spare
parts kits.
Hako system maintenance, cus-
tomer:
Work to be carried out by the customer
according to the service and mainte-
nance instructions in the operating
manual (daily and weekly).
The machine's parts to be ser-
viced are marked with a yellow
dot and yellow areas
The operator is duly instructed when
the vehicle is delivered.
Hako system maintenance I:
(every 125 operating hours)
Completed by technical experts from an
authorized Hako service center in ac-
cordance with the specific vehicle sys-
tem maintenance using spare parts kits.
Hako system maintenance II:
(every 250 operating hours)
Completed by technical experts from an
authorized Hako service center in ac-
cordance with the specific vehicle sys-
tem maintenance using spare parts kits.
Hako system maintenance III S:
(every 500 operating hours, safety
check)
Completed by technical experts from an
authorized Hako service center in ac-
cordance with the specific vehicle sys-
tem maintenance using spare parts kits.
Completion of all legally prescribed,
safety-related tests in accordance with
UVV-BGV-TÜV-VDE