13
4.2 Brushes and pads
The Hakomatic E 430 must be
equipped with brushes from the
accessories kit, as required by the
degree of dirtiness and kind of
ground.
Refer to section "Technical Data" on
page
4.2.1 Installation of brush
O
Power supply plugs pull
O
Empty tanks.
O
Dismount squeegee according to in-
structions on page 14/Fig. 12.
O
Lower brush head.
O
Tilt machine backwards and place
on the brush lift-out pedal.
O
Place brush on the catch and turn
clockwise to lock.
O
Slowly tilt Hakomatic back into posi-
tion.
O
Mount squeegee
O
Power supply plugs put in
4.2.2 Removal of brush
O
Empty the tanks.
O
Lift the squeegee and the brush.
O
Machine switch on
O
Turn on switch "D" for unlocking of
Brush.
O
Machine switch off
O
Press the rear end of the machine
downwards.
pull the machine towards the rear,
O
Brush is now lying in front of the
machine.
4. Taking into operation
Fig.11
13
4.2 Brushes and pads
The Hakomatic E 430 must be
equipped with brushes from the
accessories kit, as required by the
degree of dirtiness and kind of
ground.
Refer to section "Technical Data" on
page
4.2.1 Installation of brush
O
Power supply plugs pull
O
Empty tanks.
O
Dismount squeegee according to in-
structions on page 14/Fig. 12.
O
Lower brush head.
O
Tilt machine backwards and place
on the brush lift-out pedal.
O
Place brush on the catch and turn
clockwise to lock.
O
Slowly tilt Hakomatic back into posi-
tion.
O
Mount squeegee
O
Power supply plugs put in
4.2.2 Removal of brush
O
Empty the tanks.
O
Lift the squeegee and the brush.
O
Machine switch on
O
Turn on switch "D" for unlocking of
Brush.
O
Machine switch off
O
Power supply plugs pull
O
Press the rear end of the machine
downwards.
pull the machine towards the rear,
O
Brush is now lying in front of the
machine.
4. Taking into operation
Fig.11
Summary of Contents for Hakomatic E 430
Page 1: ...Instruction Manual Hakomatic E 430 7324 12...
Page 29: ......
