HAKO Hakomatic E 430, Instruction Manual

15

4.4 Wasser infeed

O

Mount the new sealing strips by

inverse sequence of operation. 

O

Tightening of the knurled nuts (just

slightly, by hand) has to be done

starting from the center towards out-

side (sealing strips with slots to

frontside, and plain one to the rear)

Note: 

If worn, the rear sealing strip

can be turned at the frontside edge.

Note:

The supporting strip may

Modify the sealing strip effect,  hard-

soft, and thus be adapted to different

floor conditions.

Before starting to work, fill-in fresh

water and detergent as described

Below:

O

Open the tank lid and tilt it to the

Rear.

O

Fill the fresh water tank with water

(max 50 C) as required by the work

to be done, and add detergent as

specified by the manufacturer

O

Filling capacity: max 22 litres

Note:

Use only detergent suitable for

automatic machines (low foaming) if
not, the suction turbine Can damage
by formation of excessive quantities of
foam.

We recommend using our agents

for cleaning and care, which are

adapted to the Hakomatic. Those

products comply with the provisions

of the Detergents Act (WRMG

applicable in Germany).

When the Hakomatic E 430  is being

pushed, squeegee and brush drive

plate must be lifted.

4. Taking into operation

15

4.4 Wasser infeed

O

Mount the new sealing strips by

inverse sequence of operation. 

O

Tightening of the knurled nuts (just

slightly, by hand) has to be done

starting from the center towards out-

side (sealing strips with slots to

frontside, and plain one to the rear)

Note: 

If worn, the rear sealing strip

can be turned at the frontside edge.

Note:

The supporting strip may

Modify the sealing strip effect,  hard-

soft, and thus be adapted to different

floor conditions.

Before starting to work, fill-in fresh

water and detergent as described

Below:

O

Open the tank lid and tilt it to the

Rear.

O

Fill the fresh water tank with water

(max 50 C) as required by the work

to be done, and add detergent as

specified by the manufacturer

O

Filling capacity: max 22 litres

Note:

Use only detergent suitable for

automatic machines (low foaming) if
not, the suction turbine Can damage
by formation of excessive quantities of
foam.

We recommend using our agents

for cleaning and care, which are

adapted to the Hakomatic. Those

products comply with the provisions

of the Detergents Act (WRMG

applicable in Germany).

When the Hakomatic E 430  is being

pushed, squeegee and brush drive

plate must be lifted.

4. Taking into operation