background image

3

General information

Apart from the information contained in

this manual, the generally applicable

legal provisions for safety and preven-

tion of accidents must be adhered to.

Do not put this manual aside without

having read it, even if you did already

operate similar ground cleaning equip-

ment before. Allow yourself the time to

do so in order to safe time at a later

moment. The operator has to use the

machine in accordance to its intended

fields of application. During driving

operation, he has to take account of

the local conditions and when working,

he has to pay attention to other per-

sons, in particular to children. Nobody

is allowed to stay in the zone of 

danger.

The warning and instruction plates at-

tached to the Hakomatic E 430 give

important advice about safe operation.

Before starting to work, the operator

has to check that the Hakomatic and

its working implements are in proper

and safe operating condition.

Caution! 

The protective cover of brus-

hes/drive plates must only be removed

for maintenance or transport purposes

and with the engine being turned off.

Do not perform cleaning work without

the covers being closed and locked.

Machines that are not in perfect condi-

tion must not be used.

It is indispensable to get familiar with

operation of all types of attachment

and controls as well with their function

before operation begins. Once you ha-

ve started to work there will be no time

to do so.

Operation

Ground sweepers may be operated

only by appropriate persons who have

been trained for such work, who have

testified their capability to the owner of

the unit or his authorized representati-

ve and who have been ordered expli-

citly by him to operate the machine.

The machine may be used only on

those areas as clearly specified by the

owner or his authorized representati-

ve.

Never leave the machine unattended

as long as the motors are running and

the machine is not protected against

unintended movements.

To prevent the machine from being

used by unauthorized persons, the

control key must be removed such

that the travel drive unit is locked.

When transporting the Hakomatic,

shut down the motors of the working

implements. The operator has to use

the machine in accordance to its inten-

ded fields of application.

During driving operation, he has to

take account of the local conditions

and has to pay attention to other per-

sons, in particular to children.

Use cleaning agents only, which are

suitable for automatic machines (low

foaming), and adhere to the instruc-

tions for use, disposal and to the pre-

cautions specified by the manufacturer

of the cleaning agent.

1. General safety instructions

3

General information

Apart from the information contained in

this manual, the generally applicable

legal provisions for safety and preven-

tion of accidents must be adhered to.

Do not put this manual aside without

having read it, even if you did already

operate similar ground cleaning equip-

ment before. Allow yourself the time to

do so in order to safe time at a later

moment. The operator has to use the

machine in accordance to its intended

fields of application. During driving

operation, he has to take account of

the local conditions and when working,

he has to pay attention to other per-

sons, in particular to children. Nobody

is allowed to stay in the zone of 

danger.

The warning and instruction plates at-

tached to the Hakomatic E 430 give

important advice about safe operation.

Before starting to work, the operator

has to check that the Hakomatic and

its working implements are in proper

and safe operating condition.

Caution! 

The protective cover of brus-

hes/drive plates must only be removed

for maintenance or transport purposes

and with the engine being turned off.

Do not perform cleaning work without

the covers being closed and locked.

Machines that are not in perfect condi-

tion must not be used.

It is indispensable to get familiar with

operation of all types of attachment

and controls as well with their function

before operation begins. Once you ha-

ve started to work there will be no time

to do so.

Operation

Ground sweepers may be operated

only by appropriate persons who have

been trained for such work, who have

testified their capability to the owner of

the unit or his authorized representati-

ve and who have been ordered expli-

citly by him to operate the machine.

The machine may be used only on

those areas as clearly specified by the

owner or his authorized representati-

ve.

Never leave the machine unattended

as long as the motors are running and

the machine is not protected against

unintended movements.

To prevent the machine from being

used by unauthorized persons, the

control key must be removed such

that the travel drive unit is locked.

When transporting the Hakomatic,

shut down the motors of the working

implements. The operator has to use

the machine in accordance to its inten-

ded fields of application.

During driving operation, he has to

take account of the local conditions

and has to pay attention to other per-

sons, in particular to children.

Use cleaning agents only, which are

suitable for automatic machines (low

foaming), and adhere to the instruc-

tions for use, disposal and to the pre-

cautions specified by the manufacturer

of the cleaning agent.

1. General safety instructions

Summary of Contents for Hakomatic E 430































Reviews: