HAKO Hakomatic E 430, Instruction Manual

6

Hakomatic E 430

A squeegee and suitable brushes or
pads are required for wet cleaning of
hard floorings.
The rotating brushes scrub the floor
thoroughly, removing the dirt by
means of suds, thus cleaning the floor.
The soiled water is drawn in during the
same cycle by means of the squee-
gee. This way the floor can be step-
ped on immediately afterwards, it is
dry and clean.

Useful advice for perfect work

Prior to wet cleaning it is necessary to
clean the floor. This way, not only the
cleaning efficiency is improved, but
wear of the brush will be substantially
reduced at the same time. If floors are
particularly dirty or it wax has to be
removed (basic cleaning). The floor
should be treated twice. During the
first cycle, the floor is scrubbed with
the cleaning agent selected according
to the degree of dirt encountered, the 

Allow the cleaning agent to act on the

floor for approx. 5 or 10 minutes, com-

plying with the manufacturer's instruc-

tions, then scrub the floor once again

while the squeegee is lowered.

Important note :

Comply with the in-

structions for correct dosage of deter-

gent. Correct  dosage will help you to

save money and to take care of the

environment.

If there is much foam, this will affect

the performance of the machine. 

Actually it indicates that there is exces-

sive dosage or improper suitability of

detergent for the existing kind of dirt.

Detergent particles contained in the

soiled water and not being used will

cause formation of foam.

Instructions for dosage are given on

the detergent tank. Please take those

manufacturers recommendation as a

first basis. Tests made by yourself in

practice then soon will make you find

the ideal Hako detergent and the per-

fect dosage applicable to it.

Working principle

2. Principle of operation

Fig.1

6

Hakomatic E 430

A squeegee and suitable brushes or
pads are required for wet cleaning of
hard floorings.
The rotating brushes scrub the floor
thoroughly, removing the dirt by
means of suds, thus cleaning the floor.
The soiled water is drawn in during the
same cycle by means of the squee-
gee. This way the floor can be step-
ped on immediately afterwards, it is
dry and clean.

Useful advice for perfect work

Prior to wet cleaning it is necessary to
clean the floor. This way, not only the
cleaning efficiency is improved, but
wear of the brush will be substantially
reduced at the same time. If floors are
particularly dirty or it wax has to be
removed (basic cleaning). The floor
should be treated twice. During the
first cycle, the floor is scrubbed with
the cleaning agent selected according
to the degree of dirt encountered, the 

Allow the cleaning agent to act on the

floor for approx. 5 or 10 minutes, com-

plying with the manufacturer's instruc-

tions, then scrub the floor once again

while the squeegee is lowered.

Important note :

Comply with the in-

structions for correct dosage of deter-

gent. Correct  dosage will help you to

save money and to take care of the

environment.

If there is much foam, this will affect

the performance of the machine. 

Actually it indicates that there is exces-

sive dosage or improper suitability of

detergent for the existing kind of dirt.

Detergent particles contained in the

soiled water and not being used will

cause formation of foam.

Instructions for dosage are given on

the detergent tank. Please take those

manufacturers recommendation as a

first basis. Tests made by yourself in

practice then soon will make you find

the ideal Hako detergent and the per-

fect dosage applicable to it.

Working principle

2. Principle of operation

Fig.1