HAKO Jonas 1200 V, Instruction Manual

6

Safety information

1.2

General Provisions

• Apart from the provisions contained 

in this instruction manual, the gene-
ral safety provisions and the acci-
dent prevention regulations as 
imposed by law have to be complied 
with.

• Before taking your machine into ope-

ration, carefully read the instruction 
manual and comply with all points 
mentioned there during work.

• Persons being trained by qualified 

Hako technicians only are authori-
sed to operate, service and repair 
the machine.

• You are advised to thoroughly study 

the safety instructions since precise 
knowledge only helps avoiding er-
rors during operation of the machine 
and thus guarantee faultless usage 
of the machine.

• The operating instructions have to 

be at hand at the place of use of the 
machine, and therefore have to be 
kept readily available at the machi-
ne.

• When selling or letting the machine 

for rent, hand out these documents 
to the new owner/operator and have 
the transfer certified!

• The warning and instruction plates 

attached to the machine contain va-
luable advice about safe operation. 
Immediately replace incomplete or il-
legible labels.

• As far as safety standards are con-

cerned, spare have to equal genuine 
spare parts!

• Keep clear of hazard zone of the 

Hako-Jonas 1200 V/D.

• Only use a mobile phone when the 

machine standing still.

• Passenger transport is not admitted.

1.3

Provisions for Operation

• Before taking into operation, check 

the machine for operational safety! 
Immediately remedy malfunctions!

• It is indispensable for the operator to 

get acquainted with all attached im-
plements and controls as well as 
with their function before operation 
begins. Once you have started to 
work, no time will be left to do so!

• When working with the machine use 

firm and skid proof shoes.

• The machine may be used only on 

such surfaces clearly specified by 
the owner or his authorised repre-
sentative.

• When working with the machine take 

notice of third persons, especially 
children.

• The machine is not designed for col-

lecting hazardous, inflammable or 
explosive dusts or substances.

• This machine must not be used as 

dust-evacuating machine with dust 
filter insert (separator) to collect 
dusts which are hazardous to health.

• Usage of the machine in explosive 

areas is prohibited.

• Pull the ignition key to avoid un-

authorized use of the machine.

• Before commencing work, the ope-

rator has to make sure that the ma-
chine and its accessories are in pro-
per and safe condition. Machines 
with known defects must not be 
used.

• Before operation of the machine, ad-

just driver's seat such that complete 
visibility of the riding track and the 
rear working area is given!

• For safety reasons, the driver's seat 

is equipped with a seat contact 
switch. Function of this contact 
switch must not be bypassed!

• Disengage all drive systems before 

cranking the engine.

6

Safety information

1.2

General Provisions

• Apart from the provisions contained 

in this instruction manual, the gene-
ral safety provisions and the acci-
dent prevention regulations as 
imposed by law have to be complied 
with.

• Before taking your machine into ope-

ration, carefully read the instruction 
manual and comply with all points 
mentioned there during work.

• Persons being trained by qualified 

Hako technicians only are authori-
sed to operate, service and repair 
the machine.

• You are advised to thoroughly study 

the safety instructions since precise 
knowledge only helps avoiding er-
rors during operation of the machine 
and thus guarantee faultless usage 
of the machine.

• The operating instructions have to 

be at hand at the place of use of the 
machine, and therefore have to be 
kept readily available at the machi-
ne.

• When selling or letting the machine 

for rent, hand out these documents 
to the new owner/operator and have 
the transfer certified!

• The warning and instruction plates 

attached to the machine contain va-
luable advice about safe operation. 
Immediately replace incomplete or il-
legible labels.

• As far as safety standards are con-

cerned, spare have to equal genuine 
spare parts!

• Keep clear of hazard zone of the 

Hako-Jonas 1200 V/D.

• Only use a mobile phone when the 

machine standing still.

• Passenger transport is not admitted.

1.3

Provisions for Operation

• Before taking into operation, check 

the machine for operational safety! 
Immediately remedy malfunctions!

• It is indispensable for the operator to 

get acquainted with all attached im-
plements and controls as well as 
with their function before operation 
begins. Once you have started to 
work, no time will be left to do so!

• When working with the machine use 

firm and skid proof shoes.

• The machine may be used only on 

such surfaces clearly specified by 
the owner or his authorised repre-
sentative.

• When working with the machine take 

notice of third persons, especially 
children.

• The machine is not designed for col-

lecting hazardous, inflammable or 
explosive dusts or substances.

• This machine must not be used as 

dust-evacuating machine with dust 
filter insert (separator) to collect 
dusts which are hazardous to health.

• Usage of the machine in explosive 

areas is prohibited.

• Pull the ignition key to avoid un-

authorized use of the machine.

• Before commencing work, the ope-

rator has to make sure that the ma-
chine and its accessories are in pro-
per and safe condition. Machines 
with known defects must not be 
used.

• Before operation of the machine, ad-

just driver's seat such that complete 
visibility of the riding track and the 
rear working area is given!

• For safety reasons, the driver's seat 

is equipped with a seat contact 
switch. Function of this contact 
switch must not be bypassed!

• Disengage all drive systems before 

cranking the engine.