27
Maintenance and Care
Hako-System Maintenance S (Safety
check)
The following maintenance woks are to
be performed by an authorised Hako
Service workshop at least once yearly.
To be performed
Interval
every 500 hours of operation
Perform maintenance works according to Hako-System Maintenance II
o
Clean travel drive motor from carbon dust and check carbon brushes for smooth
operation and wearing and replace carbon brushes if required
o
Clean brush motors from carbon dust and check carbon brushes for smooth opera-
tion and wearing and replace carbon brushes if required
o
Test drive and function test
o
27
Maintenance and Care
Hako-System Maintenance S (Safety
check)
The following maintenance woks are to
be performed by an authorised Hako
Service workshop at least once yearly.
To be performed
Interval
every 500 hours of operation
Perform maintenance works according to Hako-System Maintenance II
o
Clean travel drive motor from carbon dust and check carbon brushes for smooth
operation and wearing and replace carbon brushes if required
o
Clean brush motors from carbon dust and check carbon brushes for smooth opera-
tion and wearing and replace carbon brushes if required
o
Test drive and function test
o