05-7180-00.fm
71
Maintenance and Servicing
Charging the battery with the on-board charger
The battery is charged via the integrated on-board charger. A battery charge
is recommended when the charge condition is low, but no later than when the
cleaning functions are shut off.
1. Place the machine on a level surface and turn it off.
2. Remove the mains plug
from the tray and plug it into a 230 V
socket.
3. The charging process now starts automatically.
Checking the charging process
During the charging process, the progress of the charging is displayed in the
MFD:
1 Once the mains plug has been plugged in, the initialisation phase starts
and the symbol
Charger with surrounding magnifying glass
Fig. 23-A
is
displayed. The information about the type of battery which has been
installed
• appears to the left of this
and
• the charge characteristic which has been set
Fig. 23-C
.
2 Charging starts, and is indicated by a bar that is continuously filled
Fig. 23-D
. At the same time, the battery capacity that has already been
stored appears to the right of this in three symbols:
• Symbol
battery capacity less than 20 %
• Symbol
battery capacity less than 80 %
• Symbol
battery capacity more than 80 %
3 The end of charging is indicated by the following symbols:
• Symbol
charger with green tick and filled bar
Fig. 23-H
• Symbol
battery capacity 100 %
Fig. 23-I
The charger switches to trickle charging.
Fig. 23:
1
2
3
B
C
A
D
E
F
G
H
I
Summary of Contents for Scrubmaster B175 R
Page 16: ...16 01 7180 00 fm Safety instructions H Fig 2 I G I H J G J A...
Page 100: ...100 06 7180 00 fm Attachments options...
Page 102: ......
