05-7180-00.fm
95
Maintenance and Servicing
4. Tighten the lock nuts:
Height adjustment
The height adjustment (X) of the supporting rollers
has been set to
7 mm in the factory. If striping still occurs despite optimum inclination adjust-
ment, readjust the distance between the supporting rollers and the lower edge
of the sealing strip.
1. Place the machine on a level surface.
2. Lower the squeegee. The sealing strips must now be resting vertically onto
the floor.
3. Loosen nuts
Fig. 53-B
and adjust distance between supporting roller and
ground as per the table.
4. Tighten nuts.
Distance from floor (X) Use
<7 mm
Very smooth floor surfaces, e.g. coated screed,
PVC, linoleum
7 mm
Standard setting
>7 mm
Very uneven floor surfaces, e.g. poorly laid tiles
(water does not drain off)
Fig. 53:
B
X
A
Summary of Contents for Scrubmaster B175 R
Page 16: ...16 01 7180 00 fm Safety instructions H Fig 2 I G I H J G J A...
Page 100: ...100 06 7180 00 fm Attachments options...
Page 102: ......
