Hako Scrubmaster B175 R
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweepin before!
Use only cleaning agents suitable for automatic machines! (low foaming!)
Please pay attention to the informations in the instruction manua!
11
8
5
4
3
1
6
OPERATION
1.
Unplug the charging cable and put it in its box
1
2.
Fill the clear water tank from opening
2
. ( max 50° C ). Multifunction display (MFD)
3
shows the water level at 20%:n intervals.
3.
Switch the machine on by the key switch
4
and actuate driving direction from button
5.
4.
Press green button
6
to lower brush head
7
and squeegee
8
, suction turbine swithes on.
5.
Press pedal
9,
machine moves and brush head drive switches on. Use knob
11
to adjust
the water level in MFD
10
(if necessary)
NOTE! Make sure that pads / brushes are installed!!
Installing the bruhes: Place the brushes under the brush head in the correct positions, sit on
the bench and use knob
11
in MFD to select the brush attachment icon
12
and press the
knob, press the knob again to confirm selection
13
. Wait until the brushes are engaged
14
7
9
10
2
12
13
14
