33
Operation
If other batteries are used, the
total discharge signal
transducer must be adjusted.
This adjustment work should
only be performed at an
authorized Hako service
center.
The trough battery is provided with a
connection cable with battery plug
(Fig. 15/5). When the battery plug is
plugged into the vehicle socket
(Fig. 15/6), the vehicle is ready to oper-
ate. To charge the trough battery, insert
the battery plug in the charger. The ve-
hicle includes a battery charger provid-
ing
• 36 Volt/60 ampere
• IUIa characteristic curve
• 230 V power supply line
Pay attention to the safety information
titled "Information on driving batteries“,
supplementary sheet 88-60-2556, en-
closed with each battery.
