36
Operation
•
Spraying/Vacuuming tool
Area of use: For manual cleaning of
areas which are difficult to access
with spraying and vacuuming tools.
A holder can be installed on the left
hand side of the vehicle to fix the
vacuuming tool. Two holes are
already drilled in the left-hand side of
the vehicle for this. The
corresponding switch is provided on
the right-hand operating panel to
operate the vacuuming tool.
The parking brake must be
actuated before putting the
spray-vacuuming tool into
operation, otherwise the
spraying-vacuuming tool has
no function!
The following belong to the spraying-
vacuuming tool:
-
Floor scrubbing and vacuuming
tool
(7009)
-
Suction and spraying hose
(7766)
-
Tool holder and attachment
parts
(7311.10)
•
Hand-held vacuum cleaner
Area of use: For vacuuming up water
manually in areas which are difficult
to access.
The hand-held vacuum cleaner can
be fixed to the tool holder (refer to
spraying-vacuuming tool).
The hand-held vacuum cleaner
contains:
-
Adapter
to connect the following
tools (7893)
-
Flexible plastic extension hose
,
length: 3 m (7880)
-
Suction pipe
(for connection to the
plastic extension hose), length:
1.3 m (7881)
-
Suction nozzle
with rubber lips
(7883)
•
Side collision protection
(7680.30)
The side collision protection consists
of two steel bars which can be
assembled on the right and left-hand
sides of the vehicle at the height of
the circular brushes and deflectors to
protect the scrubber drier from
damage cause by collisions. The
side collision protection can be
disassembled quickly, without the
need of any tools.
