20
Starting Up
6. Close the lock on the brush, see Fig-
ure 7.
7. Close the deflector (Fig. 5/1): take
hold of the grip (Fig. 5/3), raise the
deflector (Fig. 5/1), pivot towards the
vehicle and lower it into the deflector
lock (Fig. 5/2). The deflector
(Fig. 5/1) is now in its working posi-
tion.
Lock closed
Lock open
)LJ
,QVWDOOLQJWKHGULYHSODWHVZLWKSDG
1. Turn the drive plate over and place
the pad on the contact surface, press
on and fix in place with the center-
lock.
2. Lock the drive plate with the pad in
the catches as described in sec-
tion ”Installing the brushes”.
%UXVKVHOHFWLRQ
The scrubber drier must be equipped
with the brushes and pads from the ac-
cessories program according to the ac-
cumulation of dirt and characteristics of
the floor; also refer to Section 4.
Summary of Contents for Scrubmaster B310 R/TB 1020
Page 1: ...QVWUXFWLRQ 0DQXDO 6FUXEPDVWHU 5 7...
Page 98: ...98 Maintenance and Service...
