22
Starting Up
$GMXVWLQJWKHGULYHUVVHDW
The driver's seat (Fig. 9) must be ad-
justed so that the driver is seated com-
fortably and can reach all the operating
elements with ease.
The vehicle is equipped with a
seat contact switch. The vehi-
cle can only be operated when
the operating person is seated
on the seat.
The scrubber drier is equipped with a
driver's seat which can be adjusted in a
longitudinal direction (forward and
back):
1. Press the lever on the right of the
seat outwards slightly.
2. Slide the seat forward or back in
steps of 15 mm.
)LJ
%HIRUHVWDUWLQJXSGDLO\
Carry out the following checks before
starting the vehicle up for its daily oper-
ation (also refer to Section 5.3.2):
1. Check the recovery tank, empty as
necessary. Clean it as necessary.
Refer to Sections 5.6.1 and 5.6.2.
2. Fill the solution tank and cleaning
agent in accordance with the manu-
facturer's mixing directives. Refer to
Section 3.1.4 and Section 5.5.1.
Only use cleaning agents (non-
foaming) suitable for the vehi-
cle's vendor. We recommend
using our clean and care prod-
ucts which are specially bal-
anced for the vehicles. These
products meet the require-
ments stipulated in the Ger-
man Washing and Cleansing
Agent Act (WRMG).
3. Check the battery charge and re-
charge as necessary; refer to Sec-
tion 5.4.1.
Before starting the vehicle for
its first working operation, carry
out an initial battery charging
routine; refer to Section 2.2.
4. Check the parking space for signs of
leaks. Hoses, lines and tanks must
show no signs of leaks or damage. If
necessary, clear up any defects be-
fore putting the vehicle into opera-
tion.
Summary of Contents for Scrubmaster B310 R/TB 1020
Page 1: ...QVWUXFWLRQ 0DQXDO 6FUXEPDVWHU 5 7...
Page 98: ...98 Maintenance and Service...
