90
Maintenance and Service
,QVWDOOLQJQHZUXEEHU
GHIOHFWRUVWULSV
)LJ
1 Deflector
2 Rubber deflector strips
3 Clamping rail
4 Clamping rail hooks
5 Wing nuts
The deflector (Fig. 31/1) must
be fixed in its service position
(refer to Section 2.3.1, Point 1).
1. Loosen the wing nut (Fig. 31/5) at
the end of the deflector.
2. Slide the clamping rail (Fig. 31/3) in
the vehicle's driving direction (for-
wards) until the clamping rail hooks
(Fig. 31/4) are freed and the clamp-
ing rail (Fig. 31/3) can be removed
away from the vehicle.
3. Remove the old rubber deflector
strips (Fig. 31/2).
4. Position the new rubber deflector
strips (Fig. 31/2) in place.
5. Mount the clamping rail (Fig. 31/3)
from the outside and slide back by
hand so that the clamping rail hooks
(Fig. 31/4) engage.
Tighten the wing nut (Fig. 31/5) so that
it engages in the thread of the clamping
rail (Fig. 31/3) and tightens the clamp-
ing rail firmly (Fig. 31/3).
1
2
3
4
5
4
Summary of Contents for Scrubmaster B310 R/TB 1020
Page 1: ...QVWUXFWLRQ 0DQXDO 6FUXEPDVWHU 5 7...
Page 98: ...98 Maintenance and Service...