Scrubmaster B400 R (7190)
125
Maintenance and servicing
5.4
Waste water tank
5.4.1
Emptying the waste water tank
Empty and clean the waste water tank
Fig. 45-8
as required but at least once
a day. When the warning symbol
Waste water tank full
Fig. 44-1
appears on
the multifunction display and an acoustic warning signal is output, the suction
function is switched off and the waste water tank should be emptied
immediately.
1. Drive to a suitable disposal centre.
2. Position the machine, ensuring the drain hose
Fig. 44-2
reaches the drain
in the ground.
3. Turn the machine off and remove the key.
4. Remove the drain hose
Fig. 44-2
from the holder, open the drain valve and
empty the waste water tank over the drain.
5. Ensure that the drain hose closure is fully closed after draining
Fig. 44-3
!
6. Stow away the drain hose in the holder again.
1
Warning symbol
Waster water tank
2
Waste water tank drain hose
3
Drain valve closed
Environmental danger
Observe applicable laws and local regulations when disposing of
detergents!
Fig. 44
1
3
2
Summary of Contents for Scrubmaster B400 R
Page 1: ...Scrubmaster B400 R RM RH 7190 Operating manual Part number 88 10 3255 Valid as from 03 2021...
Page 9: ...Scrubmaster B400 R 7190 9...
Page 26: ...26 Scrubmaster B400 R 7190 Safety instructions K J Fig 2 L J M A O N Q M K N P O 1 2 3 P Q L C...
Page 158: ...158 Scrubmaster B400 R 7190 Attachments options Fig 67 5 6 3 2 4 1 3 12 9 10 11 1 4 7 8...
