02-7175-00-00.fm
29
Operation
2.2.2
Controls at the machine
Mains connection Fig. 7-2
The mains connection supplies voltage to the charger.
Filling opening fresh water Fig. 7-5
The solution tank is filled via a hinged filling opening.
Optionally, the solution tank can be filled via the automatic filling unit,
see section 5.8.7.
Foot lever brush decoupler Fig. 7-8
By actuating the brush decoupler, the rotating brushes can be disassembled
quickly and without tools.
Locking lever parking brake Fig. 7-11
The parking brake stops the machine from rolling away accidentally.
Engage the parking brake:
1. Push down the operating brake
Fig. 7-12
fully.
2. Engage the locking lever of the parking brake with the rear part of the foot.
Release the parking brake:
Actuate the operating brake pedal.
Operating brake pedal Fig. 7-12
When the accelerator pedal is released (forwards or reverse) the machine
comes to a stop due to the braking effect of the travel drive. If this braking
effect is not sufficient, the operating brake can be applied in addition.
Fig. 7:
5
2
12
8
11