03-7175-00-00.fm
35
Putting into service
3.4
Cleaning
3.4.1
Turning on the machine
1. Disconnect the mains plug from the socket and place it in the storage
recess.
2. Turn the machine on with the key switch.
3. Release the parking brake.
4. Select the driving direction with the driving direction selector switch.
5. Actuate the accelerator pedal.
No. Description
1 Turn on the machine
2 Select the driving direction via the driving direction selector switch
3 Select the cleaning programme
4 Loosen the parking brake and actuate the accelerator pedal. The
brushes and water supply are switched on.
5 Adjust the fresh water quantity as required using the adjusting lever of
the fresh water metering system.
Attention
Make sure that the adjusting lever has been opened
sufficiently. Water supply only starts from mark (1)
onwards!
•Position 0: Water supply OFF
•Position 1: Water supply MINIMUM
•Position 2: Water supply MAXIMUM
Attention
• Before operating the machine, read and observe the safety
instructions in chapter 1.
• The machine can only be put into service when the driver is sitting
on the driver's seat.
• The travel drive can only be started when the accelerator pedal is
not actuated when turning the machine on.
0
1
2