54
05-7175-00-00.fm
Maintenance and Servicing
5.3.8
Charging the battery (only 7175.30)
The batteries are charged with the charger
Fig. 16-A.
The batteries can
already be charged when one segment in the charging status indicator
Fig. 14-51
has gone out.
1. Place the machine on a level surface and turn it off.
2. Disconnect the battery plug
Fig. 16-B
on the machine.
3. Connect the battery plug of the machine to the charger
Fig. 16-C
.
4. Switch on the quick-charger. For charging times, please refer to the table,
see section 5.3.7.
5. During the charging process, the battery charging status is displayed in the
display
Fig. 16-D
of the quick-charger. In the meantime, the charging con-
trol indicator
Fig. 14-51
in the display panel is not active!
6. Terminate the charging process:
• Switch off the quick-charger
• Disconnect the battery plug from the charger and reconnect it to the
machine
Fig. 16-E.
Attention
• The number of quick charging processes is limited to four a day.
More frequent utilisation may result in excessive heat and
premature failure of the batteries.
• Only charge the battery with the supplied quick-charger!
Note
• An error is present when the battery symbol flashes in connection
with a field, see operating manual of the charger.
Fig. 16:
A
C
B
E
D