17
First Operation
2
First Operation
2.1
Instruction
Instruction is required before first oper-
ation. First instruction into handling of
the machine must be held by a qualified
person sent by your local Hako contract
dealer. Your Hako dealer will be in-
formed by the manufacturer upon deliv-
ery of the vehicle and will contact you to
make a date for instruction.
2.2
Initial charging procedure
Before first operation of the
machine, fully charge the bat-
tery with an initial charging pro-
cedure and comply with the op-
erating instructions of the
charger as well as with those of
the battery manufacturer.
Hako cannot be held liable for
damages resulting from the
fact that the initial charging has
not or insufficiently been done.
2.3
Before Taking into Operation
Proceed to the following inspections be-
fore taking the machine into operation:
1. Check parking site for signs of leak-
age. Hoses, lines and tanks must be
free from any leakage or damage.
2. Open seat hood.
3. Check charge of battery and charge
if required.
4. Close seat hood.
2.4
Start Machine
Before starting the machine
you are advised to read and
comply with the Provisions of
Operating from Safety Infor-
mation chapter!
Before starting the machine, subse-
quently ac-tuate the following control el-
ements:
1. Set all operating levers and switches
to neutral.
2. Secure the vehicle by engaging the
parking brake.
3. Turn key switch and start machine.
- After the machine has switched on,
the charge control display (TSG) is
lighting up by full charging battery.
Do not use the Sweepmaster
B1200 RH at ambient tempera-
tures of more than 40°C.
Do not switch on the machine
at temperatures of 0°C or less.
Its not possible to switch on the
machine, when the accelerator
pedal is linked.
