18
First Operation
2.5
Operation
Proceed to the following to set the ma-
chine into operation:
1. Check the machine, see paragraph
2.3 - Before Taking into Operation.
2. Start vehicle, see paragraph 2.4.
In initial position, vacuuming is
activated. Use the operating
draw if the collected dirt is wet.
3. Lower sweeper roller and side
broom.
4. Release parking brake.
5. Slowly depress drive pedal until de-
sired speed has been attained.
6. Check filling level of the dirt hopper
and emty if required.
7. Operate shaking installation regular
for cleanig the filter.
2.6
Machine stopping and
parking
1. Release drive pedal which returns
automatically in neutral position and
the machine slows down.
2. Actuate parking brake.
3. Lift sweeper roller and side broom.
4. Switch machine off.
Slowing down the Sweepmas-
ter B1200 RH is possible by
applying opposite forces with
the drive pedal or by using the
service brake.
When leaving the machine un-
attended, pull key switch in or-
der to preclude unauthorized
use.
2.7
After work
1. Ride machine to suitable site for
cleaning.
2. Stop machine, lift sweeper roller and
side boom.
3. Start shaking procedure.
4. Empty dirt hopper, see operation
chapter 3.2.2.
5. Clean machine.
Do not clean the electrical
parts by means of high-pres-
sure cleaning equipment.