48
Maintenance and Care
5.4.6
Batterie einsetzen
• Turn engine off and pull key.
• Secure machine by engaging the
parking brake.
• Fold back seat hood.
• Insert batteries into the battery tray
from the top.
(Fig. 12/)
Fig.12
Fig.13
6 V/240 Ah, GiV maintenance-free
• Connect batteries and enclosed ca-
ble set according to (Fig. 13/) (check
for tight seating) and grease poles.
• Check set battery type at the low dis-
charge signal sender or set if re-
quired.
• Connect charging plug of the battery
connection cable and cable of the
charger unit and proceed to initial
charging.
• After charging of the batteries, con-
nect charger plug and device plug for
electrical connection (Fig. 13/1) .
Now the Sweepmaster B1200 RH is op-
erable.
If the battery type setting at the
LDS should be incorrect, have
the setting modified by quali-
fied pesonnel in an approved
workshop.