17
Starting Up
2
Starting Up
2.1
Before starting up for the first
time
2.1.1 Unpacking
Remove the packaging, open the
fastening straps and take the
Sweepmaster from the pallet. For
reasons of packaging, the handlebar of
the Sweepmaster is pivoted forwards.
First of all, pivot the handlebar to its
operating position.
Pivoting the handlebar to its
operating position
1. Loosen the wing bolts (Fig. 4/1) on
the right and left sides of the
handlebar (Fig. 4/2) a few
revolutions until the handlebar
(Fig. 4/2) can be straightened up.
2. Pivot the handlebar (Fig. 4/2)
towards the rear and set it to a height
convenient for the user.
3. Tighten the wing bolts (Fig. 4/1) on
the right and left sides of the
handlebar (Fig. 4/2).
Fig. 4
1
2
