28
Operation
After jolting, the knob is to be
kept in position 1 for about 25
seconds.
Control lamp, shaking system
(Fig. 10/5)
Proceed to jolting of the filter system
upon lighting of this control lamp by ac-
tuating the knob (Fig. 10/4) in position
2.
The control lamp flashes dur-
ing the shaking procedure and
extinguishes after filter has
been cleaned.
Jolting is effectuated in 7 inter-
vals.
Control lamp, direction indicator
(Option) ((Fig. 10/6)
Indicate, if using the indicator lever, the
direction.
Houmeter (Fig. 10/7)
Indicates the operating hours. the coun-
ter works only if the driver is seated and
the ignition is ON.
Control lamp, parking brake
(Fig. 10/8)
Lights upon actuation of the parking
brake. Extinguishes upon release of the
parking btake.
Battery charge status indicator
(Fig. 10/9)
Lights upon actuation of the ignition
switch and has to extinguish as the en-
gine fires.
Horn (Fig. 10/10)
An acoustic signal sounds upon actua-
tion of this button.
Ignition switch (Fig. 10/11)
To switch ignition on and off, to start
and stop engine and to secure it against
unauthorised use.
00000
