52
Maintenance and Care
5.10.2 Change Engine Oil
If the machine has not been
used for a longer time, let the
engine run to have the oil at-
tained appropriate tempera-
ture.
Caution!
Burning hazard at muffler pipe!
For change engine oil proceed as fol-
lows:
• Turn engine off and pull key.
• Secure machine by engaging park-
ing brake.
• Open seat hood.
• Loosen wing screws of the front cov-
er and tip the front cover outwards.
• Loosen and remove lock screw (Fig.
18/1), drain oil.
• Attach lock screw (Fig. 18/1) again
and fill engine oil in the filling opening
(Fig. 18/2) with the machine standing
on level ground.
• Let the engine run a short time.
• Check oil level with dipstick, contin-
ue filling if required.
Fig.18
Engine oil: SAE 15 W 40 (1.5 litre)
Use an oil-resistant funnel for
filling engine oil.
1
1
2
2
Sweepmaster P1200 RH
Sweepmaster D1200 RH