HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
6-13
Version 1.0
Secondary FIPs
6.8 Sensor Photo:No Pap 1 Failure
Step
Actions and Questions
Yes
No
1
INITIAL ANALYSIS
Inspect the following components.
• Sensor Photo:No Pap 1 on the
PWBA Feeder
(PL3.1.36)
•
Sensor Photo:Face Control
(PL3.1.13)
•
Motor Assy
(PL2.2.22)
•
Plate Torque
(PL2.2.11)
•
Plate Assy Bottom
(PL2.1.2)
•
PWBA Feeder
(PL3.1.36)
•
PWBA Size 1
(PL9.1.19)
•
Harness Assy Feeder (J33-J331)
(PL9.1.3)
•
PWBA HKB26 MCU
(PL10.1.13)
•
Harness Assy N/MOT
(PL3.1.39)
•
PWBA HKB PS
(PL10.1.17)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
Go to step 2
Replace the
problem com-
ponents
2
SENSOR PHOTO:NO PAP 1 ANALYSIS
Remove the Cassette Assy.
Check the Voltage between P/J33-2 and P/J33-7 on the
PWBA HKB26 MCU
.
Does the Voltage Fall down From +3.3VDC to 0VDC when
the Cassette removed?
Replace the
PWBA HKB26
MCU
(RRP10.1.7)
Go to step 3
3
HARNESS ASSY FEEDER (J33-J331)
(PL9.1.13) ANALYSIS
Check the continuity between L331-16 and J33-2, J331-11
and J33-8, and J331-10 and J33-8.
Is there the continuity between L331-16 and J33-2, J331-11
and JJ33-8, and J331-10 and J33-8?
Go to step 4
Replace the
Harness Assy
Feeder (J33-
J331)
4
PWBA SIZE 1 (PL9.1.19)
ANALYSIS
Check the continuity between P61-5 and P331-16, P61-3 and
P331-10, and P61-4 and P331-11.
Is there the continuity between P61-5 and P331-16, P61-3
and P331-10, and P61-4 and P331-11?
Replace the
PWBA Size 1
(PL9.1.9)
Go to step 5
Summary of Contents for b 6100
