HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
8-13
Version 1.0
Diagnostic Mode
1.5.8 Maintenance Info
The Maintenance Info menu displays information that is contained on the MCU PWB. This
information is used to determine if the drum cartridge is nearing end-of-life, feed roll change interval,
machine serial number, and to clear the error log,
Since this information is contained on the MCU PWB, if the MCU PWB is replaced, all information is
lost.
Table 4. Maintenance Information
Test
Display
Function
Image Counter
0000NNN
When Select is pressed, the count is
displayed. This test counts the num-
ber of images created. If running
double sided prints, the image
counter will count twice for a single
sheet of paper.
Sheet Counter
0000NNN
When Select is pressed, the count is
displayed. The internal counter
counts up every FEED signal. The
counter counts up even if the paper
jammed.
Toner Page Count
0000NNN
When Select is pressed, the count is
displayed. This test counts the num-
ber of toner page prints.
Serial Number
XXXXXXXXXX
When Select is pressed, the serial is
displayed.
Reset Error Log
Start to Confirm
Cancel to abort
After Select is pressed, you can
press Start to reset (clear) the error
log or press cancel to abort the
selection.
Summary of Contents for b 6100
