HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-21
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 1.1.7 Cover Right (PL1.1.8) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Open the
Cover Assy Rear
.
4. Remove the
Cover Assy Top
(RRP 1.1.4).
5. Remove the four screws securing the
Cover Right
to the printer.
6. Disengage two hooks at the top of
Cover Right
from the holes in the printer.
7. Disengage two hooks at the bottom of
Cover Right
from the holes in the printer.
8. Remove the
Cover Right
.
Replacement
In the following steps, mount the
Cover Right
while paying attention to the
sections overlapped with the
Cover Assy Top
.
1. Align the
Cover Right
with its mount position on the printer.
2. Engage four hooks of the
Cover Right
with the holes in the printer to lock.
3. Secure the
Cover Right
to the printer with four screws.
4. Mount the
Cover Assy Top
(RRP 1.1.4).
5. Close the
Cover Assy Rear
.
6. Mount the
Cover Front L/H
(RRP 1.1.9).
7. Mount the
Cover Assy Front
(RRP 1.1.8).
Summary of Contents for b 6100
