HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-33
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 1.2.3 Cover Assy Rear(Standard) (Reference Only) continued
Removal
In the following steps, take care not to drop and then damage the
Cover Assy Rear
.
1. Open the
Cover Assy Rear
from the printer.
2. Draw the lead edge of
Stopper
(PL1.2.10) secured to the
Cover Assy Rear
off the hole in the
Cover Assy Rear
.
3. Pull upward to unlock the
Stopper Pivot R
(PL1.2.9) that secures the left
Cover Assy Rear
to the printer.
4. Sliding the
Cover Assy Rear
to the left, release the bearing bores of
Cover Assy Rear
from
the left and right bosses of printer and remove it from the printer.
Replacement
In the following steps, take care not to drop and then damage the
Cover Assy Rear
.
1. Align the left and right bearing bores of
Cover Assy Rear
with the left and right bosses on
the rear side of the printer.
2. Sliding the
Cover Assy Rear
to the right, mount it on the printer.
3. Secure the left side of
Cover Assy Rear
to the printer with the
Stopper Pivot R
(PL1.2.9).
4. Insert the lead edge of
Stopper
(PL1.2.10) into a hole in the
Cover Assy Rear
.
5. Close the
Cover Assy Rear
.
Summary of Contents for b 6100
