HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-51
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 3.1.1 Roll Assy Turn (PL3.1.1) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Remove the
Chute MBF Assy
(RRP 4.1.1).
4. Remove the
Cover Assy L/F
(RRP 1.1.2).
5. Remove the
Cover Left
(RRP 1.1.1).
6. Remove the
Cover Assy Top
(RRP 1.1.4).
7. Remove the
Cover Right
(RRP 1.1.7).
8. Remove the
Plate Assy Left
(RRP 9.1.1).
9. Remove the
Plate Handle
(RRP 9.1.3).
10. Remove the
PWBA HKB PS
(RRP 10.1.9).
11. Remove the
Feeder
(RRP 3.1.10).
12. Unplug the connector (P/J641)on the
Clutch Assy Turn
(PL3.1.2) from the
Feeder
.
13. Remove the four screws securing the
Roll Assy Turn
to the Feeder.
14. Remove the
Roll Assy Turn
together with
Spring Extension
(PL3.1.3) and
Spring Chute
(PL3.1.4) from the Feeder.
15. Remove the
Spring Chute
(RRP 3.1.2).
16. Unhook the left
Spring Extension
from two notches of
Roll Assy Turn
, and remove the
Spring
Extension
.
17. Unhook the right
Spring Extension
from two notches of
Roll Assy Turn
, and remove the
Spring
Extension
.
Summary of Contents for b 6100
