10-62
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 3.1.5 Feeder Assy (PL3.1.19) continued
Replacement
In the following steps, take care not to drop and lose the
Spring Nudger
(PL3.1.29).
1. Align the position exactly, mount the
Spring Nudger
(PL3.1.29) on the boss of
Feeder
.
In the following steps, align the
Feeder Assy
position so that the leading end of
Spring Nudger
enters the boss of
Feeder Assy.
2. Insert the lead edge of left shaft of
Feeder Assy
into the left bearing bore of
Feeder
, and
slide the
Feeder Assy
to the left.
3. Secure the left shaft of
Feeder Assy
to the
Feeder
with the
Bearing
(PL3.1.38).
4. Restore the reversed
Feeder
so that the top surface faces up.
5. Secure the left shaft of
Feeder Assy
to the
Feeder
with the E-ring.
6. Mount the
Clutch Assy Feed
(RRP 3.1.8).
7. Mount the
Feeder
(RRP 3.1.10).
8. Mount the
PWBA HKB PS
(RRP 10.1.9).
9. Mount the
Plate Handle
(RRP 9.1.3).
10. Mount the
Plate Assy Left
(RRP 9.1.1).
11. Mount the
Cover Right
(RRP 1.1.7).
12. Mount the
Cover Assy Top
(RRP 1.1.4).
13. Mount the
Cover Left
(RRP 1.1.1).
14. Mount the
Cover Assy I/F
(RRP 1.1.2).
15. Mount the
Chute MBF Assy
(RRP 4.1.1).
16. Mount the
Cover Front L/H
(RRP 1.1.10).
17. Mount the
Cover Assy Front
(RRP 1.1.8).
Summary of Contents for b 6100
