HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-71
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 3.1.8 Clutch Assy Feed (PL3.1.37) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Remove the
Chute MBF Assy
(RRP 4.1.1).
4. Remove the
Cover Assy I/F
(RRP 1.1.2).
5. Remove the
Cover Left
(RRP 1.1.1).
6. Remove the
Cover Assy Top
(RRP 1.1.4).
7. Remove the
Cover Right
(RRP 1.1.7).
8. Remove the
Plate Assy Left
(RRP 9.1.1).
9. Remove the
Plate Handle
(RRP 9.1.3).
10. Remove the
PWBA HKB PS
(RRP 10.1.9).
11. Remove the
Feeder
(RRP 3.1.10).
12. Remove a screw fixing Cramp(PL 3.1.44) and Bracket(PL 3.1.33) from the Feeder.
13. Remove the three screws securing the
Bracket
from the
Feeder
.
14. Remove the
Bracket
from the
Feeder
.
15. Draw the
Gear 3
(PL3.1.34) from the shaft of
Feeder
.
16. Draw the
Gear 2
(PL3.1.31) from the shaft of
Feeder
.
17. Disengage the E-ring that secures the
Clutch Assy Feed
to the
Feeder
.
18. Unclamp the harness of
Clutch Assy Feed
from the
Feeder
.
19. Unplug the connector (P/J65) from the
PWBA Feeder
.
20. Draw the
Clutch Assy Feed
from the shaft of
Feeder Assy
(PL3.1.19) in the
Feeder
.
Summary of Contents for b 6100
