10-72
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 3.1.8 Clutch Assy Feed (PL3.1.37) continued
Replacement
1. Aligning the position exactly, insert the
Clutch Assy Feed
into the shaft of
Feeder Assy
(PL3.1.19) in the
Feeder
.
2. Plug the connector (P/J65) to the
PWBA Feeder
.
3. Clamp the harness of
Clutch Assy Feed
to the
Feeder.
4. Secure the
Clutch Assy Feed
to the shaft of
Feeder Assy
in the
Feeder
with the E-ring.
5. Aligning the position exactly, insert the
Gear 2
(PL3.1.31) into the shaft of
Feeder
.
6. Aligning the position exactly, insert the
Gear 3
(PL3.1.34) into the shaft of
Feeder
.
7. Align the
Bracket
(PL3.1.33) with its mount position to the
Feeder
.
8. Tighten the Bracket and the Cramp(PL 3.1.44) on the Feeder by a screw.
9. Secure the
Bracket
from the
Feeder
with three screws.
10. Mount the
Feeder
(RRP 3.1.10).
11. Mount the
PWBA HKB PS
(RRP 10.1.9).
12. Mount the
Plate Handle
(RRP 9.1.3).
13. Mount the
Plate Assy Left
(RRP 9.1.1).
14. Mount the
Cover Right
(RRP 1.1.7).
15. Mount the
Cover Assy Top
(RRP 1.1.4).
16. Mount the
Cover Left
(RRP 1.1.1).
17. Mount the
Cover Assy I/F
(RRP 1.1.2).
18. Mount the
Chute MBF Assy
(RRP 4.1.1).
19. Mount the
Cover Front L/H
(RRP 1.1.10).
20. Mount the
Cover Assy Front
(RRP 1.1.8).
Summary of Contents for b 6100
