HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-87
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 4.1.5 Actuator N/P MBF(PL4.1.12) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Remove the
Chute MBF Assy
(RRP 4.1.1).
4. Remove the
Spring MBF
(RRP 4.1.9).
5. Remove the
Gear Pick Up
(RRP 4.1.10).
6. Remove the
Roll Assy MBF
(with3-6,28)(RRP 4.1.2).
7. Disengaging two hooks that secure the
Tray Bottom Assy
to the
Chute MBF Assy
(PL4.1.1),
open the
Tray Bottom Assy
toward the front.
8. Remove the
Tray Bottom Pick Up
(RRP 4.1.12).
9. Disengaging two hooks that secure the
Actuator N/P MBF
to the back of
Tray Bottom
(PL4.1.11), remove the
Actuator N/P MBF
from the
Chute MBF Assy
.
Replacement
1. Aligning the position exactly, mount the
Actuator N/P MBF
on the back of
Tray Bottom
(PL4.1.11) in the
Chute MBF Assy
(PL4.1.1.)
2. Secure the shaft of
Actuator N/P MBF
to two hooks on the back of
Tray Bottom
.
3. Mount the
Tray Bottom Pick Up
(RRP 4.1.12).
4. Insert the
Spring Tray Bottom MBF
(PL4.1.13) into two studs of
Tray Bottom Pick Up
from the
Chute MBF Assy
.
5. Deflecting the right hook of
Chute MBF Assy
, rotate the
Tray Bottom Assy
together with the
Tray Bottom Pick Up
toward the rear.
6. Insert two shafts of
Chute MBF Assy
into two stud holes of
Tray Bottom Pick Up
to secure
the
Tray Bottom Assy
with left and right hooks of
Chute MBF Assy
.
7. Mount the
Roll Assy MBF
(with3-6,28)(RRP 4.1.2).
8. Mount the
Gear Pick Up
(RRP 4.1.10).
9. Mount the
Spring MBF
(RRP 4.1.9).
10. Mount the
Chute MBF Assy
(RRP 4.1.1).
11. Mount the
Cover Front L/H
(RRP 1.1.10).
12. Mount the
Cover Assy Front
(RRP 1.1.8).
Summary of Contents for b 6100
