HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
3-5
Version 1.0
Primary FIPs:Error Codes
HAKUBA Error Codes continued
Code
--
Message
Cause
Results
-------------
How to Clear the Code
(If you cannot clear the code, go to the
appropriate error code FIP, or to the
option service manual)
E2
--
E2-0:EARLY-
FEED JAM
There is a paper jam at the Sensor Photo:Regi.
The paper actuates the Sensor Photo:Regi too
early.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Open the Cover Assy Front.
Remove the jammed paper.
Close the Cover Assy Front.
E2
--
E2-1:MIS-
FEED JAM
There is a paper jam at the Sensor Photo:Regi.
The paper does not reach the Sensor Photo:Regi
within the specified time.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Open the Cover Assy Front.
Remove the jammed paper.
Close the Cover Assy Front.
C5
--
C5:ADD
PAPER TO
TRAY1/2/3
Tray 1/2/3 is out of paper.
The Sensor Photo:No Pap1/2/3 on the PWBA
Feeder (PL3.1.36) is actuated.
The printer completes only the current
print cycle.
-------------
ADD the paper to the Tray 1/2/3.
C5
--
C5:ILLEGAL
SIZE
The paper fed from the Tray 1/2/3 is different from
the NVM set size.
The printer completes only the current
print cycle.
-------------
Replace the stacked paper and reload
the correct size paper.
C3
--
C3:TRAY1
OUT INSTALL
TRAY
Tray 1 is not installed or installed not in the posi-
tion.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Reinstall Tray 1 completely.
Summary of Contents for b 6100
