HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-105
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 5.1.2 Roll Regi Rubber (PL5.1.7) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Remove the
Chute MBF Assy
(RRP 4.1.1).
4. Remove the
Shaft 14
(RRP 5.1.10).
5. Remove the
Gear 14
(RRP 5.1.10).
6. Remove the
P/H Assy
(RRP 5.1.1).
7. Remove the
Spring Regi L
(RRP 5.1.6).
8. Remove the
Gear Regi Metal
(RRP 5.1.7).
9. Remove the
Gear Regi Rubber
(RRP 5.1.8).
10. Remove the
Clutch Regi
(RRP 5.1.9).
11. Disengage the left E-ring that secures the
Roll Regi Metal
(PL5.1.5) to the
P/H Assy
(PL5.1.1).
12. Unhook the
Spring Torsion
(PL5.1.29) from the notch of
Chute Upper Assy
(PL5.1.6).
13. Move the Spring Torsion to the left from the
P/H Assy
, avoiding the boss of
Bearing Metal R
(PL5.1.31) .
14. Closing the
Chute Upper Assy
and
Chute Inlet
(PL5.1.8), align the boss of
Bearing Metal R
with the right slit, and draw the
Bearing Metal R
from the
P/H Assy
.
15. Closing the
Chute Upper Assy
and
Chute Inlet
, align the boss of
Bearing Metal
(PL5.1.13)
with the left slit, and draw the
Bearing Metal
from the
P/H Assy
.
16. Draw upward the right shaft of
Roll Regi Metal
from the right bearing of
P/H Assy
.
17. Draw diagonal rightward the
Roll Regi Metal
together with
Chute Upper Assy
and
Chute Inlet
from the
P/H Assy
.
18. Remove the
Bearing Rubber R
(PL5.1.17) that secures the
Roll Regi Rubber
to the
P/H Assy
.
19. Remove the
Bearing Rubber L
(PL5.1.18) that secures the
Roll Regi Rubber
to the
P/H Assy
.
20. Moving the
Roll Regi Rubber
to the right from the
P/H Assy
, draw the left shaft of
Roll
Regi Rubber
from the left bearing bore of
P/H Assy
.
21. Draw upward the right shaft of
Roll Regi Rubber
from the bearing of
P/H Assy
, and draw
diagonal rightward the
Roll Regi Rubber
from the
P/H Assy
.
Summary of Contents for b 6100
