3-6
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Primary FIPs:Error Codes
HAKUBA Error Codes continued
Code
--
Message
Cause
Results
-------------
How to Clear the Code
(If you cannot clear the code, go to the
appropriate error code FIP, or to the
option service manual)
J5
--
J5:LOW
TONER NEED
TO REPLACE
PLEASE
WAIT
The CRU is nearing end of life and needs to be
replaced soon.
Displays warning message.
-------------
Replace the CRU.
J5
--
J5:LOW
TONER NEED
TO REPLACE
READY TO
The CRU is nearing end of life and needs to be
replaced soon.
Displays warning message.
-------------
Replace the CRU.
J3
--
EP
CARTRIDGE
NOT IN POSI-
TION
The CRU is not installed or installed not in the
position.
Motor Assy Main, Laser Scanner, and
Fuser Assy controls stop immediately.
-------------
Reinstall the CRU, or install a new
CRU.
P1
--
FUSER
PAUSE
The printer received a SET PAUSE command.
The ROS Motor and the Fuser Assy
controls stop after printing is com-
pleted.
-------------
Turn the Main Power OFF and ON.
--
PAPER SIZE
ERROR
The size of the paper loaded in the cassette is dif-
ferent than paper size that is stored in NVRAM.
In Duplex mode: The size of the paper loaded in
the cassette is not supported in Duplex Mode.
The printer completes the current print
cycle.
-------------
Rewrite the NVRAM using ADJUST-
MENT MODE MENU.
Summary of Contents for b 6100
