HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-111
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 5.1.4 Spring Sensor Regi (PL5.1.11) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Remove the
Chute MBF Assy
(RRP 4.1.1).
4. Remove the
Shaft 14
(RRP 5.1.10).
5. Remove the
Gear 14
(RRP 5.1.10).
6. Remove the
P/H Assy
(RRP 5.1.1).
7. Open upward the
Chute Upper
(PL5.1.6) together with
Holder Toner Sensor
(PL5.1.2) from the
P/H Assy
(PL5.1.4).
8. Disengage the right hook of
Spring Sensor Regi
from the
P/H Assy
.
9. Holding the operating lever of
Actuator Regi
, move it to the left to remove the right shaft
of
Actuator Regi
toward the upper right from the
P/H Assy
(PL 5.1.6).
10. Remove the
Spring Sensor Regi
inserted in the shaft of
Actuator Regi
.
Replacement
1. Insert the
Spring Sensor Regi
into the right shaft of
Actuator Regi
(PL5.1.10).
2. Holding the operating lever of
Actuator Regi
, insert the left shaft into the left hole in
the
P/H Assy
(PL5.1.4).
3. Holding the operating lever of
Actuator Regi
, push the bracket of
P/H Assy
with the left
shaft to deflect, and insert the right shaft of
Actuator Regi
into the right hole in the
P/H Assy
.
4. Engage the left hook of
Spring Sensor Regi
with the back of operating lever of
Actuator
Regi
, and engage the right hook with the right hole in the
P/H Assy
.
5. Close downward the
Chute Upper
(PL5.1.6) together with
Holder Toner Sensor
(PL5.1.2) from
the
P/H Assy
.
6. Mount the
P/H Assy
(RRP 5.1.1).
7. Mount the
Gear 14
(RRP 5.1.10).
8. Mount the
Shaft 14
(RRP 5.1.10).
9. Mount the
Chute MBF Assy
(RRP 4.1.1).
10. Mount the
Cover Front L/H
(RRP 1.1.10).
11. Mount the
Cover Assy Front
(RRP 1.1.8).
Summary of Contents for b 6100
